Eigenschaften
- Die Style:
3-Die Set
- Kaliber:
45-70 Leverevolution
- Versandgewicht: 0,688kg
- Versandhöhe: 38mm
- Versandbreite: 122mm
- Versandlänge: 147mm
- UPC: 734307919887
Nicht verfügbar.
Artikel-Nr.: 430109085
Herst.-Nr.: 91988
Benachrichtigt werden, sobald verfügbar? Hier klicken 74.9 EURWähle dieses ULTIMATE RIFLE 4-DIE SET für deine Wiederladebedürfnisse. Dieses Set bietet eine Voll-Längen-Resize-Dies, um dein Messing auf die Fabrikneuen Dimensionen zurückzubringen, perfekt für das Wiederladen von Hülsen, die aus anderen Waffen abgefeuert wurden.
Der Collet Neck Sizing Die wird auf deinem feuergeformten Messing verwendet und sorgt für die bestmögliche Genauigkeit. Es ist kein Hülsenfett erforderlich, und die Hülsen halten fast ewig.
Der Easy Adjust Dead Length Bullet Seating Die macht die Einstellung der Geschossseatin einfach und garantiert die perfekte Setztiefe jedes Mal. Der Factory Crimp Die sorgt für einen sicheren Crimp bei Geschossen mit oder ohne Crimp-Rille. In den meisten Fällen verbessert es die Genauigkeit, indem es einen einheitlichen höheren Startdruck bietet und der fertige Kartusche eine fabrikähnliche Genauigkeit und Zuverlässigkeit verleiht.
Dieses Set ist komplett und bereit für dein nächstes Reloading-Projekt!
3-Die Set
45-70 Leverevolution
Sub-Moa in a Savage model 10 11.09.2017
All of my brass has been once fired through my rifle only, so I primarily use the neck sizing die only and full length size only if the brass gets to tight to chamber. First reloads with these dies produced accurate and repeatable results, and all groups were between 1-2". After testing with different charge weights, powder, and seating depth groups dropped down to a consistent sub-moa groups. avg around 3/4.
Lee Prcision 4-Die set advantages 09.03.2017
Most of the Lee sets do not always include the Factory Crimp die. This is why I opted for the 4 die set. The included shell holder is not something you get with RCBS and other Die sets. Since I use a Universal De-priming die for almost every case, the pin in the full length re-sizing die is the first thing to go. I still need to use a Small base resizing die set for brass fired in other rifles. I reload for both an M1A and a DPMS Recon G2. For 7.62x51 and .308 this set is all you need for new brass . Once fired brass might need both the Lee set and an additional SB resizing die to cover all of your needs. I have Lee die sets for many rifle and pistol calibers... as well as Hornady and RCBS and others. Reliable and accurate for my needs.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.