Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Österreich
604544621181 100044701
The Uniflow-III Powder Measure is the most accurate Uniflow that RCBS has ever produced. The UPM-III throws consistently accurate charges reload after reload. The exacting tight tolerance allow powder to pour uniformly from the measuring cylinder and into a case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. The UPM-III changes easily from charge to charge of the same powder type without having to empty the powder hopper. The NG resistant anti-static hopper is large enough to hold 1lb of extruded powder or ½ pound of flake powder for extended reloading sessions. New on the UPM-III is the ability to use one metering cylinder and rotor for both rifle and pistol to throw charges from 0.5 grains to 95 grains.   Note: The UPM-III Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run.Not for use with Black Powder line.   -Machined reference surfaces for exacting tight tolerances- 0.5-95 grain capacity- 0.10 grain accuracy- NG Resistant, anti-static hopper- RCBS limited lifetime warranty.
159.9 159.9 1 EUR
Artikel-Nr.: 100044701
RCBS UNIFLOW 3 POWDER MEASURE
Herstellerproduktnummer: 9016 604544621181 Das Uniflow-III-Pulvermaß ist das genaueste Uniflow, das RCBS jemals hergestellt hat. Der UPM-III wirft nach dem Nachladen konstant genaue Ladungen nach. Durch die sehr enge Toleranz kann das Pulver gleichmäßig aus dem Messzylinder in ein Gehäuse gegossen werden, wodurch die Gefahr von Überlastungen durch Verstopfen beim Ablassen der Ladungen beseitigt wird. Das UPM-III wechselt leicht von Ladung zu Ladung des gleichen Pulvertyps, ohne dass der Pulverbehälter entleert werden muss. Der NG-resistente antistatische Trichter ist groß genug, um 1 Pfund extrudiertes Pulver oder ½ Pfund Flockenpulver für längere Nachladesitzungen aufzunehmen. Neu beim UPM-III ist die Möglichkeit, einen Dosierzylinder und einen Rotor für Gewehr und Pistole zu verwenden, um Ladungen von 0,5 Körnern auf 95 Körner zu werfen. Hinweis: Das UPM-III-Pulvermaß sollte in Verbindung mit einer genauen Pulverwaage zum Einstellen der ursprünglichen Ladung und zum gelegentlichen Überprüfen der Ladungen während des Laufs verwendet werden. Nicht zur Verwendung mit der Schwarzpulverlinie. - Bearbeitete Referenzflächen für enge Toleranzen - 0,5-95 Kornkapazität - 0,10 Korngenauigkeit - NG Beständiger, antistatischer Trichter - RCBS-Garantie mit begrenzter Lebensdauer.
159.9 EUR 0 159,90 € *
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften

Versandgewicht: 1,542kg Versandhöhe: 70mm Versandbreite: 108mm Versandlänge: 311mm




The Uniflow-III Powder Measure is the most accurate Uniflow that RCBS has ever produced. The UPM-III throws consistently accurate charges reload after reload. The exacting tight tolerance allow powder to pour uniformly from the measuring cylinder and into a case, thereby eliminating the hazards of overloads caused by clogging when charges are dumped. The UPM-III changes easily from charge to charge of the same powder type without having to empty the powder hopper. The NG resistant anti-static hopper is large enough to hold 1lb of extruded powder or ½ pound of flake powder for extended reloading sessions. New on the UPM-III is the ability to use one metering cylinder and rotor for both rifle and pistol to throw charges from 0.5 grains to 95 grains.   Note: The UPM-III Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run.Not for use with Black Powder line.   -Machined reference surfaces for exacting tight tolerances- 0.5-95 grain capacity- 0.10 grain accuracy- NG Resistant, anti-static hopper- RCBS limited lifetime warranty.
Newsletter