Eigenschaften
- Kaliber:
45 Auto Rim (AR)
- Style:
Press Type
- Versandgewicht: 0,018kg
- Versandhöhe: 19mm
- Versandbreite: 95mm
- Versandlänge: 127mm
- UPC: 734307901998
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 100053238
Herst.-Nr.: 90199
734307901998 Universeller Hülsenhalter, der in den meisten Marken von Wiederladepressen verwendet wird. Funktioniert nicht mit Lee Auto Prime. Sieh dir das Lee Hülsenhalter-Diagramm an.Lieferzeit ca. 14-21 Werktage.
Preise inkl. MwSt., zzgl. Versand
Der UNIVERSAL SHELL HOLDER ist ein unverzichtbares Zubehör für jeden Wiederlader. Er ist mit den meisten Marken von Wiederladepressen kompatibel und sorgt für eine präzise Handhabung deiner Hülsen.
Für eine optimale Nutzung, schau dir die Lee Shellholder Chart an, um sicherzustellen, dass du den richtigen Halter für deine Bedürfnisse wählst.
Mit dem LEE UNIVERSAL SHELL HOLDER bist du bestens ausgestattet, um deine Wiederladeprojekte effizient und präzise umzusetzen. Hol dir jetzt deinen!
45 Auto Rim (AR)
Press Type
Modified for Sinclair priming tool 13.12.2017
The Sinclair priming tool is in my opinion the best for accurately and consistently seating primers. However, for .338 LM (based on .416 Rigby) there are not a lot of options. The proper Sinclair holder is backordered from Brownell.
However the Sinclair tool accepts Lee hand priming tool shell holders and the #8 Lee shell holder fits and can be installed into the Sinclair tool by facing off the lug that holds the shell holder into a press thus converting it to a Lee priming-type shell holder, in other words just make this holder flat across the bottom as are the Lee priming shell holders. I did this easily in the lathe, a 5 minute job.
You may also need to modify the primer cup in the Sinclair tool to allow a case to fit smoothly. I took .025 off the lip of the cup to match the shell holder floor. The Sinclair plunger is adjustable (see their directions) and it sets primers just below flush when is set to .010 above the lip of the primer cup.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.