Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Overall Height: .335" Radius: .468" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C .468" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625". This should fit barrel/receiver diameters from .936"-1.350". .670" bottom radius mount. There should be a slight gap at the top of the radius between the receiver and the mount when mounted. The two spreads on this mount measure .500"-.505" and .8625" which should fit the receiver ring on the following guns: Common Applications for .670" bottom radius mount: Shotgun: Benelli Auto / Super Black Eagle / Vinchi, M2 (Will Work in the Front Set Only, 8-40 Screws) Benelli Supernova (Will Work in the Front Set Only, 8-40 AND Longer Screws) Browning A-Bolt 12 Gauge Savage 210 Savage 212 Savage 220 Stoeger M3000 / Stoeger M3500 (Will Work in the Front Set Only, 8-40 Screws) Winchester 1300 Winchester SXP Rifle: Remington 700, 722, 40x Remington 783 Remington 710/770 Remington xp 100 Remington 4, 6, 7400, 7615 (Front Set Only, 8-40 Screws) Savage arms centerfire models Winchester 70
Entdecke die vielseitige UNIVERSAL TRIJICON RMR SIGHT MOUNT!
Die UNIVERSAL .670" RADIUS SIGHT MOUNT für das Trijicon RMR von EGW ist die perfekte Lösung für alle, die auf der Suche nach einer robusten und zuverlässigen Montage sind. Hier sind die Details:
Produktbeschreibung
- Material: 7075 Aluminium
- Beschichtung: Matte Black Hardcoat
- Gesamtlänge: 1.780"
- Gesamtbreite: 1.1"
- Gesamthöhe: .335"
- Radius: .468"
- Montagehardware: (2) 6-32 Flachkopfschrauben, (1) 6-32 Set-Schraube
- Red Dot Passform: Trijicon RMR, Holosun HS507C
Die Montage hat einen .670" Radius an der Unterseite. Beim Montieren sollte oben am Radius zwischen dem Empfänger und der Montage ein kleiner Spalt vorhanden sein. Die beiden Abstände dieser Montage messen .500"-.505" und .8625", was sie für folgende Waffen geeignet macht:
Häufige Anwendungen für die .670" Radius-Montage:
- Schrotflinten:
- Benelli Auto / Super Black Eagle / Vinchi, M2 (funktioniert nur im vorderen Set, 8-40 Schrauben)
- Benelli Supernova (funktioniert nur im vorderen Set, 8-40 und längere Schrauben)
- Browning A-Bolt 12 Gauge
- Savage 210
- Savage 212
- Savage 220
- Stoeger M3000 / Stoeger M3500 (funktioniert nur im vorderen Set, 8-40 Schrauben)
- Winchester 1300
- Gewehre:
- Remington 700, 722, 40x
- Remington 783
- Remington 710/770
- Remington xp 100
- Remington 4, 6, 7400, 7615 (nur vorderes Set, 8-40 Schrauben)
- Savage Arms Centerfire-Modelle
- Winchester 70
Mit dieser Montage bist du bestens ausgestattet, um dein Ziel präzise ins Visier zu nehmen!