GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
Entdecke das ASSAULTER BELT SYSTEM V3 von GBRS GROUP!
Das GBRS Group Assaulter Belt System V3 ist ein innovatives Tragesystem, das eine 2-Gurt-Konstruktion nutzt, um eine leichte, flexible und dennoch stabile Plattform für die Befestigung von Ausrüstung, Holstern und Zubehör zu schaffen.
Produktbeschreibung
Der Gurt verwendet Type 13, 1-23/32” Gurtband (7000 lbs Zugfestigkeit) als Basis, ergänzt durch ein Feld aus PALS-Gurtband, das aus einem halbsteifen, gewebten Thermo-Polymer (Patent angemeldet) lasergecuttet wurde. Das sorgt dafür, dass deine Ausrüstung immer sicher an einer stabilen Fläche befestigt ist, während der Gurt leicht und bequem bleibt.
Um die Stabilität zu erhöhen, wird das Gurtband doppelt mit einem „W“-Stich an einer belastbaren 1,75” AustriAlpin Cobra Schnalle mit D-Ring für die Befestigung von Helo-Lanyards und anderem Zubehör genäht. Der äußere Gurt hat eine innere Fläche aus „Loop“-Velcro, um an einem flachen „Hook“-Innengurt zu haften. Dies wurde so gestaltet, weil Haken niemals zur Körperseite getragen werden sollten, besonders in einem stark beanspruchten Bereich (Gürtelbereich).
Das Innengurtsystem besteht aus einem flachen „Hook“-Innengurt mit einer einzigen Schicht aus 1,5” Scuba-Gurtband. Dies führt zu einem System, das auch als nichtmetallischer EDC-Gurt dient und eine bequeme Möglichkeit bietet, den abrasiven Hakenbereich des Innengurts beim Wenden nach innen abzudecken. Die einzelne Schicht des Scuba-Gurtbands sorgt für eine starre Oberfläche, damit IWB-Holos sicher befestigt werden können.
Spezifikationen
- Äußerer Gürtel: ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Schnalle 1.75” 18kN*
- Innerer Gürtel: 3610 Low Profile Loop 1.5” HTH Extrudierter Haken 841 1.5” Scuba-Gurtband 1.5”
- Gewicht: Innerer und äußerer Gürtel zusammen:
- Small: 12.9 oz.
- Medium: 13.8 oz.
- Large: 14.7 oz.
- X-Large: 16.8 oz.
*HINWEIS ZUR SCHNALLE: Die Registrierung, Bewertung, Genehmigung und Beschränkung von Chemikalien (REACH-Verordnung) schützt die Umwelt vor den schädlichen Auswirkungen chemischer Substanzen. Änderungen dieser Verordnung im Jahr 2023 haben möglicherweise das Aussehen der Schnalle an unserem V3-Gürtel minimal beeinflusst. Dieser minimale visuelle Unterschied hat jedoch keine Auswirkungen auf die Funktionalität des Gürtels.
Kompatibilität
- Alle MOLLE-Webtaschen/Produkte
- Holster mit Gürtel-Schlaufen (z.B. Safariland® 6075UBL)
- True North Modular Holster Adapter
Größen
**Miss deinen Taillenumfang für die richtigen Maße, benutze nicht die Hosengröße!**
- Größe S passt für Taillengrößen 27”-32” (ideale Passform 27”-31”)
- Größe M passt für Taillengrößen 31”-36” (ideale Passform 31”-34”)
- Größe L passt für Taillengrößen 35”-41” (ideale Passform 35”-39”)
- Größe XL passt für Taillengrößen 40”-50” (ideale Passform 40”-46”)