GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
Entdecke das ASSAULTER BELT SYSTEM V3 von GBRS GROUP!
Das GBRS Group Assaulter Belt System V3 nutzt ein 2-Gürtel-System, um eine leichte, flexible und dennoch stabile Plattform zu schaffen, auf der du Ausrüstung, Holster und Zubehör befestigen kannst. Der Gürtel besteht aus einem Basisband aus Type 13, 1-23/32” Gürtelwebung (7000 lbs Zugfestigkeit) und einem Feld von PALS-Webbing, das aus einem semi-rigid gewebten Thermo-Polymer (Patent angemeldet) lasergecuttet wurde. Dies sorgt dafür, dass deine Ausrüstung immer an etwas Festem gesichert ist, während der Gürtel leicht und bequem bleibt.
Um das Ganze abzurunden, haben wir das Webbing doppelt mit einem „W“ genäht und an einer lastengerechten, 1.75” AustriAlpin Cobra Schnalle mit einem D-Ring für die Befestigung von Helilanyards und anderem Equipment befestigt. Der äußere Gürtel hat eine innere Fläche aus „Loop“-Velcro, um ihn an einem flachen „Hook“-Innengürtel zu befestigen. Wir haben dies so gestaltet, weil Haken niemals in Richtung des Körpers getragen werden sollten, besonders in einem stark beanspruchten Bereich (Gürtelbereich).
Innengürtel-System
Das Innengürtel-System besteht aus einem flachen „Hook“-Innengürtel mit einer einzigen Schicht aus 1.5” Scuba-Webbing. Dies ergibt ein System, das auch als nicht-metallischer EDC-Gürtel dient und eine bequeme Möglichkeit bietet, den abrasiven Hakenbereich des Innengürtels beim Umdrehen zu verdecken. Die einzelne Schicht des Scuba-Webbings sorgt für eine feste Oberfläche, damit IWB-Holster sicher befestigt werden können.
SPECS
- Äußerer Gürtel: ONE-WRAP® ¾”, Loop 1” & 1.5”, Binding ¾”, Tegris 12 Layer, AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN*
- Innengürtel: 3610 Low Profile Loop 1.5”, HTH Extruded Hook 841 1.5”, Scuba Webbing 1.5”
- Gewicht: Innerer und äußerer Gürtel insgesamt:
- Small: 12.9 oz.
- Medium: 13.8 oz.
- Large: 14.7 oz.
- X-Large: 16.8 oz.
HINWEIS ZUM BUCKLE: Die Registrierung, Bewertung, Zulassung und Beschränkung von Chemikalien (REACH-Verordnung) schützt die Umwelt vor den schädlichen Auswirkungen chemischer Substanzen. Änderungen in dieser Verordnung im Jahr 2023 könnten die Schnalle unseres V3-Gürtels visuell beeinflusst haben. Dieser minimale visuelle Unterschied hat jedoch keinen Einfluss auf die Funktionalität des Gürtels.
Kompatibilität:
- Alle MOLLE-Webbeutel/Produkte
- Holster mit Gürtschlaufen (z.B.: Safariland® 6075UBL)
- True North Modular Holster Adapter
Größen:
**Miss deinen Taillenumfang für die richtigen Maße, benutze keine Hosengröße***
- Größe S passt für Taillengrößen 27”-32” (Ideale Passform 27”-31”, 17 MOLLE-Räume)
- Größe M passt für Taillengrößen 31”-36” (Ideale Passform 31”-34”, 20 MOLLE-Räume)
- Größe L passt für Taillengrößen 35”-41” (Ideale Passform 35”-39”, 23 MOLLE-Räume)
- Größe XL passt für Taillengrößen 40”-50” (Ideale Passform 40”-46”, 26 MOLLE-Räume)