Strong, lightweight, aluminum mount attaches to the Ruger® factory ring cuts and requires no drilling and tapping. Uses three, steel, recoil pins to prevent “scope flyoff,” and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. Super Redhawk™ .44 Mag fits only the .44 Magnum and can be installed without removing the front and rear sights. Features a matte, silver, anodized finish. Super Redhawk‡ Casull is similar in design, but uses the rear sight notch as a recoil lug to allow the frame and mount to take maximum recoil. Fits .44 Magnum, .454 Casull, and Ruger™ .480 models with removal of the rear sight. Available with black, anodized finish.
Die starke, leichte Aluminiumhalterung lässt sich an den werkseitigen Ringschnitten von Ruger® befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstoßstifte aus Stahl, um ein Abfliegen des Zielfernrohrs zu verhindern, und akzeptiert Ringe im Weaver-Stil oder Befestigungssysteme, wie sie bei Tasco 40-mm-Rotpunktoptiken verwendet werden. Super Redhawk™ .44 Mag passt nur in die .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über eine matte, silberne, eloxierte Oberfläche. Super Redhawk‡ Casull hat ein ähnliches Design, verwendet jedoch die Kimmenkerbe als Rückstoßöse, damit der Rahmen und die Halterung den maximalen Rückstoß aufnehmen können. Passend für .44 Magnum, .454 Casull und Ruger™ .480 Modelle mit entferntem Visier. Erhältlich mit schwarzer, eloxierter Oberfläche.
SPECS: .44 Mag - Aluminium, silber, matt, eloxiert. 5 Zoll (12,7 cm) lang. Nur passend für .44 Magnum. 2,6 oz (73 g) Gew. Casull - Aluminium, schwarz, matt, eloxiert. 5½" (14cm) lang. Für .44 Magnum, .454 Casull und .480 Ruger Modelle. Inklusive Befestigungsschrauben.
Mehr...
Kundenbewertungen zu WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Top Quality(08.01.2016)
Great product, you are limited to where you can mount rings/red dot sight since the mounting screws could be in the way. I mounted an Aim Point H1 red dot sight and was limited in positioning but was able to mount it in a decent spot. The mount fit snug at the rear end which is what I would expect so all the force from heavy recoil isn't soley on the mounting screws. I mounted this to a 480 ruger Super Redhawk with a cut down 5 1/2" barrel shooting a 425 gr cast bullet at 1100 fps with no movement of sight and I'm able to get 1 9/16" groups at 50 yrds. Highly recommended for red dot sights.
I did cut this mount down in the front at a simular angle to my Super Redhawk which looks custom fit to my gun. Tried uploading a pic but it wouldn't let me. Good Hunting!
Artikel-Nr.: 957000036 WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT Herstellerproduktnummer: SRH Die starke, leichte Aluminiumhalterung lässt sich an den werkseitigen Ringschnitten von Ruger® befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstoßstifte aus Stahl, um ein Abfliegen des Zielfernrohrs zu verhindern, und akzeptiert Ringe im Weaver-Stil oder Befestigungssysteme, wie sie bei Tasco 40-mm-Rotpunktoptiken verwendet werden. Super Redhawk™ .44 Mag passt nur in die .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über eine matte, silberne, eloxierte Oberfläche. Super Redhawk‡ Casull hat ein ähnliches Design, verwendet jedoch die Kimmenkerbe als Rückstoßöse, damit der Rahmen und die Halterung den maximalen Rückstoß aufnehmen können. Passend für .44 Magnum, .454 Casull und Ruger™ .480 Modelle mit entferntem Visier. Erhältlich mit schwarzer, eloxierter Oberfläche.
77.9EUR2077,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Eigenschaften:Color: SilverMarke: RugerMaterial: AluminumModell: Super Blackhawk, Super Red HawkNumber of Bases: 1-PieceStyle: Weaver-Style Bases
Strong, lightweight, aluminum mount attaches to the Ruger® factory ring cuts and requires no drilling and tapping. Uses three, steel, recoil pins to prevent “scope flyoff,” and accepts Weaver-style rings or mount systems such as used on Tasco 40mm red dot optics. Super Redhawk™ .44 Mag fits only the .44 Magnum and can be installed without removing the front and rear sights. Features a matte, silver, anodized finish. Super Redhawk‡ Casull is similar in design, but uses the rear sight notch as a recoil lug to allow the frame and mount to take maximum recoil. Fits .44 Magnum, .454 Casull, and Ruger™ .480 models with removal of the rear sight. Available with black, anodized finish.
Die starke, leichte Aluminiumhalterung lässt sich an den werkseitigen Ringschnitten von Ruger® befestigen und erfordert kein Bohren und Gewindeschneiden. Verwendet drei Rückstoßstifte aus Stahl, um ein Abfliegen des Zielfernrohrs zu verhindern, und akzeptiert Ringe im Weaver-Stil oder Befestigungssysteme, wie sie bei Tasco 40-mm-Rotpunktoptiken verwendet werden. Super Redhawk™ .44 Mag passt nur in die .44 Magnum und kann installiert werden, ohne das vordere und hintere Visier zu entfernen. Verfügt über eine matte, silberne, eloxierte Oberfläche. Super Redhawk‡ Casull hat ein ähnliches Design, verwendet jedoch die Kimmenkerbe als Rückstoßöse, damit der Rahmen und die Halterung den maximalen Rückstoß aufnehmen können. Passend für .44 Magnum, .454 Casull und Ruger™ .480 Modelle mit entferntem Visier. Erhältlich mit schwarzer, eloxierter Oberfläche.
SPECS: .44 Mag - Aluminium, silber, matt, eloxiert. 5 Zoll (12,7 cm) lang. Nur passend für .44 Magnum. 2,6 oz (73 g) Gew. Casull - Aluminium, schwarz, matt, eloxiert. 5½" (14cm) lang. Für .44 Magnum, .454 Casull und .480 Ruger Modelle. Inklusive Befestigungsschrauben.
Mehr...
Kundenbewertungen zu WEIGAND COMBAT SUPER REDHAWK® .44 MAG MOUNT
Anzahl der Bewertungen: 1
Von brownells.com: 1
Durchschnittliche Bewertung: 5
Top Quality(08.01.2016)
Great product, you are limited to where you can mount rings/red dot sight since the mounting screws could be in the way. I mounted an Aim Point H1 red dot sight and was limited in positioning but was able to mount it in a decent spot. The mount fit snug at the rear end which is what I would expect so all the force from heavy recoil isn't soley on the mounting screws. I mounted this to a 480 ruger Super Redhawk with a cut down 5 1/2" barrel shooting a 425 gr cast bullet at 1100 fps with no movement of sight and I'm able to get 1 9/16" groups at 50 yrds. Highly recommended for red dot sights.
I did cut this mount down in the front at a simular angle to my Super Redhawk which looks custom fit to my gun. Tried uploading a pic but it wouldn't let me. Good Hunting!