FHD FLASH HIDERS These fit the plan B type mounts. This is an updated version that has larger wrench flats on the rear. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH H900 Atlas and Atlas XL Compatible Plan B Compatible Atlas XL Adapter No Overrun Black Nitride Finish (67 HRC Surface Hardness) Shims Not Included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
Optimale Leistung und Präzision für deine Waffe!
Die FHD FLASH HIDERS sind die perfekte Ergänzung für deine Plan B Montage. Diese aktualisierte Version verfügt über größere Schraubflächen an der Rückseite, was die Handhabung erleichtert.
Wichtig: Verwende immer eine Ausrichtungsstange, um sicherzustellen, dass das gesamte System korrekt eingerichtet ist. Achte darauf, dass alle Oberflächen gereinigt sind und das Mündungsgerät ordnungsgemäß mit dem Lauf verschraubt und mit Rockset gesichert ist. Die Verwendung an einem Q-Dämpfer kann deine Garantie ungültig machen – sei gewarnt!
Installationstipps:
- Das Mündungsgerät auf etwa 30 ft lbs anziehen.
- Stelle sicher, dass das Mündungsgerät rechtwinklig zur Schulter sitzt.
- Beim Anbringen des Schalldämpfers auf das Mündungsgerät achte darauf, dass die Gewinde und Taper sauber sind.
- Ziehe den Schalldämpfer auf 10 ft lbs an und überprüfe die Ausrichtung.
Genieße die Vorteile! Die Nitride-Beschichtung sorgt für eine bessere Abdichtung, daher ist es extrem wichtig, dass du dein Mündungsgerät richtig am Lauf anziehst und mit Rockset sicherst.
Eigenschaften:
- 17-4 PH H900
- Kompatibel mit Atlas und Atlas XL
- Plan B kompatibel
- Atlas XL Adapter ohne Überlauf
- Schwarze Nitride-Oberfläche (67 HRC Oberflächenhärte)
- Shims nicht enthalten – wenn du speziell zeitlich abstimmen möchtest, sind Shims erforderlich. Hinweis: Dein Lauf benötigt möglicherweise einen Shim, wenn der Hersteller keinen Gewindeauslass angebracht hat.