FHD FLASH HIDERS These fit the plan B type mounts. This is an updated version that has larger wrench flats on the rear. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH H900 Atlas and Atlas XL Compatible Plan B Compatible Atlas XL Adapter No Overrun Black Nitride Finish (67 HRC Surface Hardness) Shims Not Included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
Entdecke die FHD FLASH HIDERS für dein Projekt!
Die FHD FLASH HIDERS passen perfekt zu den Plan B Montagen. Diese aktualisierte Version verfügt über größere Schraubflächen an der Rückseite. Achte immer darauf, eine Ausrichtungsstange zu verwenden, um sicherzustellen, dass das gesamte System korrekt eingerichtet ist. Stelle sicher, dass alle Oberflächen gereinigt sind und das Mündungsgerät ordentlich mit Drehmoment und Rockset am Lauf befestigt ist. Die Verwendung an einem Q-Kan könnte deine Garantie ungültig machen, sei gewarnt.
Wichtige Hinweise:
- Drehmoment des Mündungsgeräts auf ca. 30 ft lbs einstellen.
- Überprüfe, ob das Mündungsgerät rechtwinklig zur Schulter sitzt.
- Beim Anbringen des Schalldämpfers auf das Mündungsgerät darauf achten, dass die Gewinde und Konen sauber sind.
- Drehmoment des Schalldämpfers auf 10 ft lbs einstellen.
- Sicherstellen, dass alles ausgerichtet ist. Viel Spaß!
Die Nitride-Beschichtung sorgt für eine bessere Abdichtung. Daher ist es äußerst wichtig, dein Mündungsgerät richtig am Lauf zu befestigen.
Eigenschaften:
- 17-4 PH H900
- Kompatibel mit Atlas und Atlas XL
- Plan B kompatibel
- Atlas XL Adapter ohne Überlauf
- Schwarze Nitride-Beschichtung (67 HRC Oberflächenhärte)
- Shimms nicht enthalten; wenn du spezifisch timen möchtest, werden Shims benötigt. Hinweis: Dein Lauf benötigt möglicherweise einen Shim, wenn der Hersteller keinen Gewindefreiraum vorgesehen hat.