The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out. When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. Data: Gas Block Material: 416 SS Barrel Diameter: 0.625" Weight: 1.34 oz. Length: 1.00" Attachment Type: Clamp on Adjustment: Front of Block Included: Gas Block - Assembled (2) 10-32 x 3/16" Socket Head Cap Screws (1) Gas Tube Roll Pins (1) 3/32 X 6" L-Shaped Hex Keys Installation Instructions & QR code for video tutorial
Die perfekte Lösung für dein AR-15: Der verstellbare Gasblock von Superlative Arms!
Der patentierte „Bleed Off“ Gasblock von Superlative Arms für die AR15-Plattform bietet eine innovative Möglichkeit, den Gasfluss anzupassen. Anstatt den Fluss wie herkömmliche verstellbare Blöcke zu beschränken, lässt dieser Block das Gas ab, was zu einer saubereren und kühleren Funktion führt.
Produktbeschreibung
- Material des Gasblocks: 416 SS
- Durchmesser des Laufs: 0.625"
- Gewicht: 1.34 oz
- Länge: 1.00"
- Befestigungsart: Clamp on
- Verstellung: Vorderseite des Blocks
Die Druckreduzierung im Block erfolgt nur auf das notwendige Maß, um den Verschluss zu betreiben. Der verbleibende Gasdruck wird aus dem Block abgelassen, was die Rückstoßwahrnehmung verringert. Der patentierte Einstellungsdetent befindet sich außerhalb des Blocks, wodurch eine Kontamination vermieden wird.
Der Gasverstellschraube schränkt den Gasfluss nicht ein, was Erosion oder Festfressen der Schraube sowie einen Verlust des Detents durch Kohlenstoffablagerungen verhindert. Obwohl der Schraube abnehmbar ist, haben wir eine Sicherheitsmechanismus hinzugefügt, der verhindert, dass du die Schraube versehentlich ganz herausdrehst.
Bei der Verwendung von SBRs und/oder Schalldämpfern ermöglicht der Bleed-Off-Port, dass übermäßiger Druck aus dem Block entweichen kann, was den Rückstoß reduziert.
Im Lieferumfang enthalten:
- Gasblock - montiert
- (2) 10-32 x 3/16" Innensechskantschrauben
- (1) Gasrohr Rollstifte
- (1) 3/32 X 6" L-förmige Inbusschlüssel
- Montageanleitung & QR-Code für Videoanleitung