The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out. When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. Data: Gas Block Material: 416 SS Barrel Diameter: 0.625" Weight: 1.34 oz. Length: 1.00" Attachment Type: Clamp on Adjustment: Front of Block Included: Gas Block - Assembled (2) 10-32 x 3/16" Socket Head Cap Screws (1) Gas Tube Roll Pins (1) 3/32 X 6" L-Shaped Hex Keys Installation Instructions & QR code for video tutorial
Entdecke die innovative Lösung für dein AR-15
Der patentierte „Bleed Off“ Gasblock von Superlative Arms ist die perfekte Wahl für dein AR-15. Dieser Gasblock passt sich an, indem er das Gas aus dem Block ableitet, anstatt den Fluss wie herkömmliche verstellbare Blöcke zu beschränken.
Produktbeschreibung
Die Vorteile auf einen Blick:
- Reduzierter Druck: Der Druck im Block wird nur auf das notwendige Maß reduziert, um den Verschluss zu betreiben.
- Sauberer und kühler Betrieb: Das überschüssige Gas wird aus dem Block abgeleitet, was das System viel sauberer und kühler laufen lässt.
- Weniger Rückstoß: Die spürbare Rückstoßreduzierung macht das Schießen angenehmer.
- Patented adjustment detent: Der Einstellmechanismus befindet sich außerhalb des Blocks, wodurch eine Kontamination ausgeschlossen ist.
- Keine Einschränkung des Gasflusses: Der Einstellschraube schränkt den Gasfluss nicht ein, was Erosion oder Festfressen der Schraube verhindert.
- Sicherheitsmechanismus: Obwohl der Block abnehmbar ist, haben wir einen Mechanismus hinzugefügt, der verhindert, dass die Schraube unabsichtlich ganz herausgedreht wird.
- Optimal für SBRs und Suppressoren: Der Bleed Off-Port lässt übermäßigen Druck entweichen, was den Rückstoß reduziert.
Technische Daten
- Material des Gasblocks: 416 SS
- Laufdurchmesser: 0.625"
- Gewicht: 1.34 oz
- Länge: 1.00"
- Befestigungsart: Clamp on
- Verstellung: Vorderseite des Blocks
Lieferumfang
- Gasblock - montiert
- (2) 10-32 x 3/16" Innensechskantschrauben
- (1) Gasrohr-Rollstifte
- (1) 3/32 X 6" L-förmige Inbusschlüssel
- Montageanleitung & QR-Code für Videoanleitung