The Superlative Arms patented “Bleed Off”, direct impingement, gas block for the AR15 platform adjusts the gas flow by bleeding the gas out of the block instead of restricting the flow like conventional adjustable blocks. Results: The pressure used in the block is reduced only to the amount required to drive the bolt carrier. The remaining gas / pressure are bled out of the block allowing the system to run much cleaner and cooler. Reduction of felt recoil. Patented adjustment detent is located outside of the block and therefore no contamination. The gas adjustment screw does not restrict the gas flow; therefore there is no erosion or seizing of the screw / no loss of detent due to carbon build up. Although it is removable, we have added a safety mechanism, which stops you from unintentionally backing the screw all the way out. When using SBR’s and / or suppressors the bleed off port allows the excessive pressure to be exhausted out of the block reducing blow back. Data: Gas Block Material: 416 SS Barrel Diameter: 0.625" Weight: 1.37 oz. Length: 1.00" Attachment Type: Solid Gas Adjustment: 30 Locked Positions, Front Of Block Bleed Off Port: Front Of Block Included: Gas Block - Assembled (2) 10-32 x 3/16" Set Screws (1) Gas Tube Roll Pins (1) 3/32 X 6" L-Shaped Hex Keys Installation Instructions & QR code for video tutorial
Entdecke den innovativen AR-15 SOLID ADJUSTABLE GAS BLOCK!
Der patentierte „Bleed Off“ Gasblock von Superlative Arms für die AR15-Plattform ist die perfekte Lösung, um den Gasfluss zu regulieren. Anstatt den Fluss wie herkömmliche verstellbare Blöcke zu beschränken, lässt dieser Block das Gas ab, was zu einer saubereren und kühleren Funktion führt.
Produktbeschreibung
- Material des Gasblocks: 416 SS
- Durchmesser des Laufs: 0.625"
- Gewicht: 1.37 oz
- Länge: 1.00"
- Montageart: Solid
- Gasverstellung: 30 verriegelte Positionen, vorne am Block
- Bleed Off Port: Vorne am Block
Die Druckreduzierung im Block erfolgt nur bis zu dem Punkt, der erforderlich ist, um den Verschluss zu bewegen. Der verbleibende Gasdruck wird aus dem Block abgelassen, was die Rückstoßwahrnehmung verringert. Der patentierte Einstellungsstift befindet sich außerhalb des Blocks, sodass keine Kontamination auftritt. Der Gaseinstellschraube schränkt den Gasfluss nicht ein, wodurch Erosion oder Festfressen der Schraube sowie der Verlust des Detents durch Kohlenstoffablagerungen vermieden werden.
Obwohl der Gasblock abnehmbar ist, haben wir einen Sicherheitsmechanismus hinzugefügt, der verhindert, dass du die Schraube unbeabsichtigt ganz herausdrehst. Bei der Verwendung von SBRs und/oder Schalldämpfern ermöglicht der Bleed Off Port, dass übermäßiger Druck aus dem Block abgelassen wird, was den Rückstoß reduziert.
Im Lieferumfang enthalten:
- Gasblock - montiert
- (2) 10-32 x 3/16" Set-Schrauben
- (1) Gasrohr-Rollstifte
- (1) 3/32 X 6" L-förmige Inbusschlüssel
- Installationsanleitung & QR-Code für das Video-Tutorial